Academic catalogue
Juan Segurola
Publications in engineering, science and the study of knowledge.
3Dresyns Engineering & Technical Publications
- Variability Management for Recovered Fillers in Photocurable Composites: Contamination, Surface State and Lot Control
- Solvolysis of Photopolymer Networks: Solvent Selection, Mass Transfer, Separation and Recovered-Feedstock Quality
- Sensor-Integrated Organ-on-Chip Platforms Made with Photopolymers: Materials, Signals, Drift and Biological Interpretation
- Radiation-Hardened Photopolymer Materials for Space Service: Chemistry, Shielding, Dose History and Property Retention
- Pyrolysis and Thermochemical Recovery of Photopolymer Waste: Product Distribution, Fillers, Emissions and Energy Balance
- Purity Requirements for Recycled Monomers and Oligomers in Photocurable Formulations: Inhibitors, Colour and Cure
- Planetary-Protection Controls for Additive Manufacturing Materials and Equipment: Bioburden, Containment and Verification
- Photoresin Storage, Transfer and Dispensing Under Vacuum or Reduced Gravity: Volatility, Wetting and Contamination
- Photopolymer Seals, Windows and Fluidic Components for Extraterrestrial Habitats: Leakage, Dust and Cycling
- Microgravity Effects on Photopolymer Cure: Convection, Bubbles, Sedimentation, Interfaces and Network Uniformity
- Membrane, Adsorptive and Hybrid Purification of Used Photopolymer Wash Solvents: Selectivity, Fouling and Quality Control
- Mechanical and Interfacial Design for Disassembly in Photopolymer Products: Reversible Joints, Access and Component Recovery
- Martian-Regolith Photocurable Composites: Mineralogy, Perchlorates, Atmosphere, Temperature and Processing
- Lunar-Regolith Photocurable Composites: Simulant Identity, Binder Demand, Vacuum, Radiation and Structural Qualification
- Long-Duration Storage of Photocurable Materials for Space Missions: Radiation, Thermal Excursions, Latency and Recovery
- Living Biosensing Materials Made by Photopolymerisation: Recognition, Signal Coupling, Containment and Calibration
- In-Space Vat Photopolymerisation: Containment, Optics, Heat, Motion and Part Release in Microgravity
- In-Situ Resource Utilisation Feedstocks for Photocurable Manufacturing: Separation, Variability, Qualification and Logistics
- Immune-Interactive Photopolymer Materials: Protein Adsorption, Innate Response, Foreign-Body Reaction and Design Limits
- Factory-Level Material-Flow Analysis for Photopolymer Manufacturing: Yield, Losses, Recovery and Inventory Reconciliation
- Extended-Producer-Responsibility and Product-Passport Models for Photopolymer Products: Data, Collection and Accountability
- Enzyme-Programmed Degradation of Photopolymer Networks: Substrate Accessibility, Kinetics, Products and Control
- Enzyme Immobilisation in Printed Photopolymer Structures: Activity Retention, Mass Transfer, Leaching and Reuse
- Chemical Recycling of Acrylate and Methacrylate Photopolymer Networks: Bond Cleavage, Product Identity and Reuse
- Cell-Free Protein-Synthesis Systems in Printed Matrices: Reagent State, Activation, Transport and Functional Lifetime
- Biohybrid Actuators Combining Living Cells and Photopolymer Structures: Force Generation, Feeding, Control and Longevity
- Biogenic-Carbon Accounting in Bio-Based Photopolymer Materials: Feedstock, Land Use, Allocation and End of Life
- Uncertainty Quantification for Data-Driven Photopolymer Models: Aleatoric Variation, Epistemic Gaps and Decision Calibration
- Terahertz Components Made from Photopolymers: Dielectric Dispersion, Absorption, Geometry and Metrology
- Sulfur-Rich Photocurable Networks: High Refractive Index, Dynamic Bonds, Odour, Stability and Processing
- Sequence-Controlled and Precision Oligomers for Photopolymer Networks: Synthesis Identity, Placement of Function and Property Attribution
- Self-Driving Laboratories for Photopolymer Formulation: Closed-Loop Experimentation, Measurement Quality and Decision Governance
- Robotic Dispensing and Formulation of Photocurable Materials: Accuracy, Cross-Contamination, Mixing and Traceability
- Reversible Radical Reservoirs in Photocurable Networks: Dormancy, Reactivation, Post-Print Growth and Long-Term Stability
- Resistive-Switching and Neuromorphic Devices Integrated with Photopolymer Platforms: Interfaces, Variability and Endurance
- Quantum-Dot-Containing Photopolymer Materials: Surface Chemistry, Optical Loss, Cure Interaction and Emission Stability
- Polymerisable Liquid-Crystal Systems Beyond Elastomers: Mesophase Control, Alignment, Optical Function and Stability
- Polymerisable Ionic Liquids in Photocurable Materials: Ionic Conductivity, Phase State, Cure and Environmental Stability
- Physics-Informed Machine Learning for Photopolymerisation: Governing Equations, Data Assimilation and Extrapolation Limits
- Photopolymer Packaging and Interconnects for Integrated Photonics: Alignment, Coupling Loss, Stress and Reliability
- Phosphorus-Containing Photopolymer Networks: Flame Response, Ion Binding, Hydrolysis and Functional Performance
- Orthogonal Photo-Click Reactions for Multimaterial Fabrication: Selectivity, Kinetics, Crosstalk and Network Compatibility
- Non-Covalent Glassy Networks for Photocurable Materials: Physical Crosslinks, Relaxation, Reprocessability and Service Limits
- Neutron-Detection Materials and Structures Enabled by Photopolymerisation: Converter Loading, Light Collection and Discrimination
- Mycelium–Photopolymer Hybrid Materials: Interface Formation, Growth, Moisture and Structural Performance
- Multimodal Foundation Models for Photopolymer Engineering: Text, Spectra, Images, Process Data and Evidence Grounding
- Microwave Dielectric Resonators and RF Components in Printed Photopolymers: Permittivity, Loss and Thermal Stability
- Microresonators and Frequency-Selective Optical Components Made by Photopolymerisation: Quality Factor, Surface and Drift
- Metal-Halide-Perovskite Photopolymer Composites: Moisture, Ion Migration, Cure Compatibility and Optoelectronic Performance
- Magneto-Optical Photopolymer Composites: Field Response, Optical Loss, Alignment and Device Integration
- Living Bacterial Materials Integrated with Photocurable Matrices: Viability, Containment, Transport and Function
- Lifecycle Digital Twins for Photopolymer Products: Material State, Process History, Service Updating and Prediction
- Human Oversight and Reproducibility in Autonomous Materials Research: Authority, Auditability and Failure Containment
- Fast-Timing Scintillator Architectures Made with Photopolymers: Light Yield, Decay, Transport and Radiation Stability
- Deep-Eutectic-Solvent-Containing Photocurable Systems: Component Identity, Speciation, Water, Polymerisation and Leaching
- Causal Inference in Photopolymer Process Development: Interventions, Confounding, Transportability and Mechanistic Claims
- Carbon-Dioxide-Derived Feedstock Claims in Photocurable Materials: Provenance Evidence, Carbonate and Carbamate Functionalisation, Carbon Accounting and Performance Limits
- Bayesian Optimisation of Photopolymer Formulations: Priors, Constraints, Mixed Variables and Experimental Efficiency
- Algae-Containing and Photosynthetic Printed Materials: Light Delivery, Gas Exchange, Growth and Mechanical Stability
- Active Learning Under Safety and Manufacturability Constraints: Candidate Selection, Feasible Regions and Stopping Rules
- Value-of-Information Methods for Prioritising Photopolymer Research: Uncertainty, Decision Impact and Experimental Choice
- Triboelectric Generators Integrated with Printed Photopolymers: Surface Charge, Contact Mechanics and Environmental Drift
- Thermally Responsive Photopolymer Actuators: Transition Temperature, Heating Route, Force and Cycling
- Subsea and Marine Service of Printed Photopolymers: Hydrostatic Pressure, Water Uptake, Biofouling and Fatigue
- Resolving Conflicting Evidence in Photopolymer Engineering: State Mismatch, Measurement Bias and Decision Rules
- Provenance and Citation Graphs for Engineering-Review Corpora: Sources, Claims, Versions and Dependency Control
- Printed Photopolymers in Harsh Chemical-Process Environments: Mixed Chemicals, Temperature, Stress and Barrier Failure
- Piezoresistive Strain Sensors in Printed Photopolymer Composites: Percolation, Gauge Factor, Hysteresis and Fatigue
- Optically Driven Photopolymer Actuators: Chromophore State, Light Penetration, Heat and Reversibility
- Ontologies for Photopolymer Materials, Processes and Qualification Evidence: Terms, Relations and Interoperability
- Negative Results and Failed Replication in Photopolymer Research: Reporting, Censoring and Engineering Value
- Minimum-Information Standard for Photopolymer Additive-Manufacturing Studies: Material, Machine, Process and Specimen State
- Magnetically Steered Soft Robots Made by Photopolymerisation: Magnetic Programming, Mechanics and Navigation
- Machine-Readable Material Passports for Photopolymer Products: Composition Boundaries, Process History and End of Life
- Low-Earth-Orbit Exposure of Photopolymer Materials: Vacuum, Radiation, Thermal Cycling and Contamination
- Living Systematic Reviews for Rapidly Changing Additive-Manufacturing Evidence: Search, Updating and Version Governance
- Ionising-Radiation Ageing of Printed Photopolymers: Dose, Atmosphere, Chain Scission, Crosslinking and Property Change
- Ionic and Electrochemical Polymer Actuators in Printed Structures: Ion Transport, Hydration, Strain and Drift
- Humidity-Responsive Photopolymer Actuators: Sorption, Swelling, Geometry, Hysteresis and Environmental Stability
- High-Pressure Service of Printed Photopolymers: Compression, Permeation, Creep, Sealing and Decompression Damage
- High-Dose Sterilisation Effects on Photopolymer Materials: Gamma, Electron Beam, Chemistry and Requalification
- From Individual Reviews to a Fourth Qualification Corpus: Evidence Architecture Across Engineering Reviews ER-301 to ER-399, State Variables, Scope Boundaries, Cross-Paper Couplings and Research Priorities
- Fire Behaviour, Smoke and Toxic-Effluent Assessment of Printed Photopolymer Systems: Test Scale and Material State
- Dielectric-Elastomer Actuators Built with Photopolymer Materials: Electrode Integration, Breakdown and Cycle Life
- Cryogenic Compatibility of Dissimilar-Material Photopolymer Assemblies: Interfaces, Seals, Microcracking and Leak Integrity
- Combined Ultraviolet, Vacuum and Thermal Exposure of Photopolymers: Synergistic Ageing and Test Equivalence
- Chemical and Gas Sensors Based on Printed Photopolymers: Sorption, Selectivity, Transduction and Regeneration
- Biosensors Integrated with Photopolymer Platforms: Immobilisation, Transport, Fouling, Signal Stability and Validation
- Benchmark Datasets for Photopolymer Modelling and Machine Learning: Coverage, Leakage, Shift and Fitness for Use
- Atomic-Oxygen Erosion of Photopolymer Materials: Surface Recession, Oxidation, Coatings and Ground Simulation
- Verification and Validation of Multiphysics Models for Photopolymer Additive Manufacturing: Parameters, Benchmarks and Uncertainty
- Thermal Metamaterials and Heat-Flow-Shaping Structures: Effective Conductivity, Interfaces and Experimental Validation
- Shear-Induced Alignment Before Photocure: Fibres, Platelets and Orientation Retention Beyond Liquid-Crystal Elastomers
- Reaction-Diffusion Fronts in Photopolymer Networks: Species Mobility, Autoacceleration, Gradients and Pattern Formation
- Origami and Kirigami Photopolymer Structures: Hinge Design, Folding Path, Damage and Deployment Repeatability
- Negative-Stiffness and Snap-Through Photopolymer Architectures: Stability, Hysteresis, Fatigue and Control
- Mechanical Metamaterials Made by Photopolymerisation: Unit Cells, Boundary Effects, Nonlinearity and Qualification
- Magnetic-Field-Assisted Photopolymerisation: Particle Alignment, Chain Formation, Cure Arrest and Functional Anisotropy
- Impact-Energy-Absorbing Photopolymer Lattices: Crushing Modes, Rate Effects, Recovery and Repeatability
- Heat Generation and Dissipation During Vat Photopolymerisation: Reaction Kinetics, Geometry, Transport and Hot Spots
- Gravity and Build Orientation as Material-State Variables: Sedimentation, Buoyancy, Drainage and Cure Asymmetry
- Functionally Graded Lattices in Photopolymer Additive Manufacturing: Gradient Definition, Interface Continuity and Performance
- Fluidic Metamaterials and Architected Flow Networks: Hydraulic Response, Deformation and Scale Effects
- Embedded Pneumatic Networks for Soft Robotic Structures: Channel Integrity, Actuation, Fatigue and Control
- Electric-Field-Assisted Photopolymerisation: Filler Orientation, Charge Migration, Dielectrophoresis and Network Formation
- Cure Shrinkage Coupled to Resin Flow: Free Surfaces, Cavitation, Feeding and Internal Defect Formation
- Buoyancy and Natural Convection in Photocurable Resins: Temperature, Density, Composition and Feature Distortion
- Auxetic Photopolymer Structures: Geometry, Manufacturing Defects, Strain Range and Failure
- Acoustic and Vibration Fields During Photopolymerisation: Bubble Motion, Particle Organisation and Cure Perturbation
- Acoustic Metamaterials in Printed Photopolymers: Resonance, Damping, Manufacturing Variation and Band-Gap Verification
- Predictive Maintenance for Vat-Photopolymerisation Equipment: Sensors, Degradation Signatures and Intervention Thresholds
- Machine-Capability Studies for Additive Manufacturing: Repeatability, Reproducibility, Nested Variation and Acceptance
- Electronic Batch Records for Photopolymer Production: Data Capture, Recipe Enforcement, Exceptions and Auditability
- Cybersecurity of Digital Manufacturing Recipes and Equipment: Access, Integrity, Provenance and Recovery
- Cleanliness Zones and Contamination Control in Photopolymer Manufacturing: Air, Surfaces, Tools and Material Segregation
- Build Layout, Part Nesting and Production Scheduling in Vat Photopolymerisation: Exposure Uniformity, Risk and Throughput
- Automation of Washing, Drying and Post-Curing: Material State, Recipe Control, Transfer Timing and Release Evidence
- Algorithmic Support Generation and Verification: Optimisation Objectives, Constraint Conflicts, Simulation and Human Override
- Wavelength-Orthogonal Multistage Photopolymerisation: Independent Reactions, Spectral Crosstalk and Sequential Property Programming
- Upconverting-Nanoparticle-Assisted Deep Photocuring: Excitation Transport, Local Emission, Heating and Network Uniformity
- Two-Photon and Multiphoton Fabrication of Photopolymer Metasurfaces: Subwavelength Feature Control, Dispersion and Device Efficiency
- Triplet–Triplet-Annihilation Upconversion for Photopolymerisation: Sensitiser–Annihilator Pairs, Oxygen, Thresholds and Cure Depth
- Transesterification Vitrimers for Photopolymer Additive Manufacturing: Catalyst, Exchange Kinetics, Creep and Reprocessing
- Transcarbamoylation and Urethane-Exchange Networks in Photocurable Materials: Catalysis, Creep, Repair and Reprocessing
- Scale-Up of Photoresin Blending: Mixing Regimes, Addition Order, Heat, Air Entrainment and Batch Equivalence
- Reversible Silyl-Ether and Siloxane-Exchange Photopolymer Networks: Trigger Selectivity, Moisture and Dimensional Retention
- Reversible Diels–Alder Photopolymer Networks: Adduct Identity, Thermal Windows, Print Stability and Rework
- Printed Micro-Optics in Photopolymers: Lens Form, Surface Error, Refractive State and Optical Qualification
- Photopolymer Photonic Crystals: Lattice Fidelity, Refractive-Index Contrast, Defects and Spectral Response
- Photopolymer Microneedles: Geometry, Insertion, Fracture, Payload, Dissolution and Skin-Interface Qualification
- Photocurable Polypeptide and Recombinant-Protein Materials: Sequence, Functionalisation, Folding and Network Attribution
- Photocurable Organoid and Spheroid Manufacturing: Encapsulation, Nutrient Transport, Fusion and Functional Maturation
- Persistent-Radical and Afterglow-Mediated Photopolymerisation: Dark Reaction, Temporal Control and Dimensional Fidelity
- Perfusable Vascular-Network Biofabrication: Channel Formation, Endothelialisation, Leakage, Flow and Remodelling
- PEG-Based Photocurable Bioinks: Architecture, Functionalisation, Mesh Size, Bioinertness and Bioactive Modification
- Oxygen-Tolerant Photoredox Polymerisation: Catalyst Cycles, Reducing and Oxidising Pathways, Regeneration and Residuals
- Organocatalytic Photocuring Without Conventional Photoinitiators: Catalyst Identity, Turnover, Spectral Activation and Limits
- Non-Cyclic Disulfide-Exchange Photopolymer Networks: Radical and Metathesis Routes, Light and Thermal Activation, Repair and Recycling
- Nanofluidic Channels in Photopolymer Materials: Fabrication, Surface Charge, Wetting, Fouling and Transport
- Microfluidic Valves, Pumps and Flow Regulators Made by Photopolymerisation: Compliance, Sealing and Cycle Life
- Microelectrode Arrays Integrated with Printed Photopolymers: Registration, Insulation, Impedance and Biological Interface
- Metal–Ligand Dynamic Photopolymer Networks: Coordination State, Stimulus Response, Toughening and Reversibility
- Mechanochemical Activation and Repair of Printed Photopolymer Networks: Force-Responsive Bonds, Local Chemistry and Verification
- Light-Driven and Magnetically Driven Photopolymer Microswimmers: Fabrication, Actuation, Tracking and Fluid Interaction
- Latent Thermal–Photo Dual-Trigger Networks: Sequencing, Shelf Stability, Conversion Partitioning and Final-State Qualification
- Ionomeric and Ionic-Cluster Photopolymer Networks: Morphology, Conductivity, Self-Recovery and Environmental Sensitivity
- Inline Spectroscopy as Process Analytical Technology for Photoresins: Identity, Concentration, Conversion and Drift
- Inkjet and Material-Jetting Deposition of Photocurable Encapsulants for MEMS and Microsensors: Registration, Interfaces and Reliability
- Imine and Hydrazone Dynamic Photopolymer Networks: Water Sensitivity, Exchange, Mechanical Recovery and Chemical Recycling
- Hydrogen-Bonded and Multiple-Supramolecular Photopolymer Networks: Association Strength, Rate Dependence and Fatigue Recovery
- Gelatin–Norbornene Thiol–Ene Bioinks: Macromer Identity, Stoichiometry, Oxygen Response and Cell-Compatible Cure
- Gelatin-Methacryloyl Bioinks: Gelatin Source, Degree of Functionalisation, Thermal State, Photocure and Cell Response
- Frontal Photopolymerisation in Additive Manufacturing: Ignition, Propagation, Heat Feedback, Stability and Geometric Control
- Fibrin and Fibrinogen in Photocurable Biofabrication: Enzymatic–Photo Dual Networks, Contraction and Remodelling
- Electrochemically Gated Polymerisation for Additive Manufacturing: Redox Control, Electrode Geometry and Spatial Selectivity
- Elastin and Tropoelastin-Derived Photocurable Materials: Molecular Identity, Elasticity, Crosslinking and Biological Function
- Diffractive Optical Elements Made by Photopolymerisation: Phase Control, Surface Quantisation and Efficiency
- Decellularised-Extracellular-Matrix Photocurable Bioinks: Source Tissue, Processing, Methacrylation, Bioactivity and Variability
- Cell-Laden Volumetric Bioprinting: Optical Dose, Cell Shadowing, Gelation, Viability and Construct Fidelity
- Boronic-Ester Dynamic Photopolymer Networks: Humidity, Diol Exchange, Self-Healing and Service Stability
- Which Data Reached the Inference: Selection, Missingness, Survivorship and Collider Bias / Qué datos llegaron a la inferencia: selección, datos faltantes, supervivencia y sesgo de colisionador
- Vat-Printed Microreactors for Chemical Processing: Residence-Time Distribution, Mixing, Compatibility and Scale-Out
- Vacuum-Compatible Fluidic and Pneumatic Components Made from Photopolymers: Leakage, Outgassing, Seals and Cycling
- Toxicological Risk Assessment of Photopolymer Constituents and Leachables: Exposure, Hazard, Read-Across and Margin of Safety
- The Hidden Transfer Problem: Why Reproducing a Procedure Is Not Reproducing a Result / El problema oculto de la transferencia: por qué reproducir un procedimiento no es reproducir un resultado
- The Hidden Time Problem: The Present State of an Experiment Depends on How It Was Reached / El problema oculto del tiempo: el estado presente de un experimento depende de cómo se alcanzó
- The Hidden Scale Problem: Mechanisms Change Their Relative Weight With Size / El problema oculto de la escala: los mecanismos cambian su peso relativo con el tamaño
- The Hidden Replication Problem: Repeated Measurements Are Not Independent Experiments / El problema oculto de la replicación: las mediciones repetidas no son experimentos independientes
- The Hidden Model Problem: When a Good Fit Becomes a Mechanism and an Optimum / El problema oculto del modelo: cuando un buen ajuste se convierte en mecanismo y en óptimo
- The Hidden Limit Problem: Non-Detection, Censoring and the Values That Were Never Measured / El problema oculto del límite: no detección, censura y los valores que nunca se midieron
- The Hidden Interaction Problem: Why One-Factor-at-a-Time Experiments Mislead / El problema oculto de la interacción: por qué los experimentos de un factor cada vez inducen a error
- The Hidden Correction Problem: When Data Treatment Creates Confidence Instead of Information / El problema oculto de la corrección: cuando el tratamiento de datos crea confianza en lugar de información
- The Hidden Classification Problem: When Categories Conceal Continuous Behaviour / El problema oculto de la clasificación: cuando las categorías ocultan un comportamiento continuo
- The Claim Comes First: Descriptive, Causal, Mechanistic and Predictive Claims Need Different Evidence / La afirmación va primero: las afirmaciones descriptivas, causales, mecanísticas y predictivas requieren evidencias diferentes
- Supplier-Quality Management for Photopolymer Raw Materials: Specifications, Audits by Evidence, Deviations and Continuity
- Structural versus Parametric Uncertainty / Incertidumbre estructural frente a paramétrica
- Strength of Evidence: Likelihood and How Much a Result Should Change a Belief / Fuerza de la evidencia: verosimilitud y cuánto debería cambiar un resultado una creencia
- Statistical Process Control for Photopolymer Manufacturing: Sampling, Control Charts, Drift and Multivariate Signals
- Solvent-Recovery Mass Balances in Photopolymer Processing: Contaminant Build-Up, Separation Efficiency and Reuse Limits
- Skin-Contact Wearables Made from Photopolymers: Occlusion, Sweat, Friction, Sensitisation and Long-Term Use
- Scientific Inference and Experimental Reasoning: Master Index and Scope / Inferencia Científica y Razonamiento Experimental: Índice maestro y alcance
- Sacrificial Mandrels and Cores for Electroforming and Composite Manufacture: Removal, Surface Transfer and Dimensional Control
- Robustness of Conclusions: Sensitivity to Assumptions, Models and Specifications / Robustez de las conclusiones: sensibilidad a supuestos, modelos y especificaciones
- Rival Explanations: Identifiability, Underdetermination and Auxiliary Hypotheses / Explicaciones rivales: identificabilidad, infradeterminación e hipótesis auxiliares
- Requirement Traceability for Additively Manufactured Photopolymer Parts: Allocation, Verification and Change Impact
- Regeneration and Reuse of Aqueous and Semi-Aqueous Wash Media: Dissolved Organics, Suspended Solids and Process Control
- Recovery of Unreacted Monomers and Photoinitiators from Photoresin Waste: Separation, Identity and Requalification
- Recovery and Requalification of Functional Fillers from Cured Photopolymer Composites: Separation, Surface State and Performance
- Radiofrequency Antennas and Transmission Structures on Printed Photopolymers: Dielectric Loss, Metallisation and Geometry
- Purification and Reuse of Products from Triggered Photopolymer Depolymerisation: Composition, Functionality and Closed-Loop Evidence
- Process-Failure-Mode-and-Effects Analysis for Vat Photopolymerisation: State Variables, Detection and Control Priority
- Prior Knowledge and Base Rates: Necessary Constraint or Hidden Bias / Conocimiento previo y tasas base: restricción necesaria o sesgo oculto
- Printed Models for Wind-Tunnel and Flow-Visualisation Testing: Surface Fidelity, Inserts, Pressure Taps and Load Limits
- Printed Fixtures and Holders for Radiation and Sterilisation Workflows: Dose Stability, Contamination and Reuse
- Printed Composite Tooling for Lay-Up, Infusion and Cure: Surface, Permeability, Thermal Expansion and Tool Life
- Printed Analytical Labware and Sample-Handling Devices: Contamination, Sorption, Cleanliness and Measurement Bias
- Primary-Data Carbon Accounting for Photopolymer Additive Manufacturing: Energy, Materials, Yield and Allocation
- Photopolymer-Derived Supercapacitor Architectures: Porosity, Conductivity, Electrolyte Wetting and Cycle Life
- Photopolymer-Derived Battery Components: Electrodes, Separators, Current Collectors, Cure Residuals and Cell Qualification
- Photopolymer Additive Manufacturing for Cultural-Heritage Replication and Conservation: Fidelity, Reversibility and Ageing
- Photodetector and Photosensor Integration with Printed Photopolymers: Spectral Response, Encapsulation and Signal Stability
- Phase-Change and Latent-Heat Materials in Printed Photopolymer Structures: Containment, Cycling and Thermal Management
- Particle and Microplastic Release from Printed Photopolymers: Wear, Weathering, Measurement and Exposure Boundaries
- Mucosal-Contact Photopolymer Devices: Saliva, Mechanical Cycling, Biofilm, Extractables and Use-State Qualification
- Hidden Error Budget Series: Master Index and Scope / Serie Hidden Error Budget: índice maestro y alcance
- Hidden Error Budget Series Synthesis: From Measurement to Inference and Transfer / Síntesis de la serie Hidden Error Budget: de la medición a la inferencia y la transferencia
- Generalisation: From the Conditions Studied to the Target / Generalización: de las condiciones estudiadas al objetivo
- From Observation to a Justified Claim: Synthesis of Scientific Inference and Experimental Reasoning / De la observación a una afirmación justificada: síntesis de inferencia científica y razonamiento experimental
- From Individual Reviews to a Third Qualification Corpus: Evidence Architecture Across Engineering Reviews ER-201 to ER-299, State Variables, Scope Boundaries, Cross-Paper Couplings and Research Priorities
- Food-Contact Tooling and Process Aids Made from Photopolymers: Migration, Cleaning, Wear and Regulatory Boundaries
- Evidence-Maturity and Technology-Readiness Assessment for Photopolymer Manufacturing: Claims, Gates and Decision Confidence
- Evidence Integration: Triangulation Across Measurements That See Different Things / Integración de evidencias: triangulación entre mediciones que observan cosas diferentes
- End-of-Life Decision Hierarchies for Photopolymer Products: Reuse, Repair, Recycling, Recovery and Disposal
- Electroluminescent and Light-Emitting Photopolymer Composites: Field Distribution, Optical Loss, Heat and Ageing
- Discriminating Experiments: Severe Tests and Operational Falsification / Experimentos discriminantes: pruebas severas y falsación operativa
- Digital Thread for Photopolymer Manufacturing: Requirements, Geometry, Material, Process, Inspection and Release
- Data Integrity and FAIR Evidence for Photopolymer Qualification: Raw Data, Metadata, Audit Trails and Reuse
- Cytotoxicity-Test Artefacts in Photopolymer Evaluation: Extraction Conditions, Dose Metrics, Controls and Result Interpretation
- Cryogenic Service of Printed Photopolymers: Glass Transition, Thermal Shock, Permeation, Fracture and Repeated Cycling
- Change Control and Requalification of Photopolymer Materials and Processes: Equivalence, Risk and Evidence Depth
- Causal Structure: Confounders, Colliders, Mediators and What Intervention Adds / Estructura causal: confusores, colisionadores, mediadores y qué aporta la intervención
- Calibration Management for Photopolymer Production and Testing: Traceability, Intervals, Guard Bands and Out-of-Tolerance Impact
- Bone–Implant Interfaces for Photopolymer-Derived Devices: Surface Chemistry, Porosity, Mechanics and Biological Evidence
- Blood-Contacting Photopolymer Devices: Haemocompatibility, Surface State, Flow, Thrombosis and Sterilisation
- Biological-Evaluation Planning for Photopolymer Devices: Material State, Contact Category, Endpoints and Evidence Integration
- Aquatic and Terrestrial Ecotoxicity of Uncured Photoresin Constituents and Mixtures: Exposure Realism and Evidence Gaps
- Analytical Monitoring of Photopolymer-Contaminated Wastewater: Target Species, Non-Target Screening and Treatment Verification
- Analytical Evaluation Thresholds for Photopolymer Extractables: Coverage, Identification, Quantitation and Uncertainty
- Analytic Multiplicity: Many Paths from the Same Data / Multiplicidad analítica: muchos caminos a partir de los mismos datos
- The Hidden Reference Problem: Blanks, Standards, Controls and Calibrations Are Part of the Measurement System / El problema oculto de la referencia: blancos, patrones, controles y calibraciones forman parte del sistema de medición
- The Hidden Proxy Problem: When the Measured Quantity Is Not the Question / El problema oculto del proxy: cuando la magnitud medida no es la pregunta
- The Hidden Observer Problem: Subjective Endpoints, Expectation and the Unblinded Reader / El problema oculto del observador: puntos finales subjetivos, expectativa y lector no cegado
- The Hidden Error Budget: Measurement-System Failure, False Precision and Experimental Design in Laboratory Science / El presupuesto oculto de error: fallos del sistema de medición, falsa precisión y diseño experimental en la ciencia de laboratorio
- The Hidden Boundary Problem: Understanding, Visualisation and Scientific Reasoning
- Printed Conductors and Resistive Elements in Photopolymer Systems: Percolation, Contact Resistance, Drift and Reliability
- Photopolymer-Enabled Electrochemical Electrodes: Surface Area, Binder State, Electrolyte Access and Cycling Stability
- From Molecular Structure to Prediction: Visual Reasoning in Organic Chemistry and Photochemistry
- Durability of Antimicrobial Claims in Photopolymer Devices: Depletion, Fouling, Cleaning, Resistance and Test Design
- Digital Traceability of Patient-Specific Photopolymer Devices: Design Input, Material Lot, Process History and Release
- Dielectric Breakdown and Insulation Ageing in Printed Photopolymers: Defects, Field Concentration, Temperature and Moisture
- Continuous Vat Photopolymerisation Dead Zones: Oxygen Transport, Membrane State, Heat and Print-Speed Limits
- Capacitive Sensors in Printed Photopolymer Structures: Dielectric State, Electrode Geometry, Humidity and Calibration
- Top-Down Vat Photopolymerisation: Free-Surface Optics, Recoating, Buoyancy, Supports and Scale-Up
- Temperature Control of Resin Vats and Feed Systems: Viscosity, Kinetics, Gradients and Process Capability
- Support-Removal Effects on Fine Features and Internal Geometries: Access, Load Transfer, Surface Damage and Verification
- Resin-Level, Hydrostatic-Pressure and Free-Surface Control in Vat Photopolymerisation: Geometry, Refill and Drift
- Recoating Dynamics of Low-Viscosity Photoresins: Meniscus Motion, Settling, Bubble Entrainment and Layer Uniformity
- Pixel Geometry, Anti-Aliasing and Projection Optics in Masked Vat Photopolymerisation: Edge Placement and Feature Fidelity
- Large-Area Projection Stitching in Vat Photopolymerisation: Registration, Dose Overlap, Seam Formation and Qualification
- Grayscale and Spatial Dose Modulation in Vat Photopolymerisation: Local Conversion, Surface Shape and Property Gradients
- Fretting and Repeated-Contact Damage in Printed Photopolymers: Contact Pressure, Slip Amplitude, Debris and Surface Evolution
- Exposure-Pattern Compensation in Vat Photopolymerisation: Optical Blur, Cure Spread, Geometry Bias and Model Transfer
- Creep Rupture and Long-Term Load Retention in Printed Photopolymers: Physical Ageing, Environment and Extrapolation Limits
- Vibration and Random-Fatigue Qualification of Printed Photopolymer Components: Spectral Loading, Fixtures and Damage Accumulation
- Thermal-Cycling Durability of Printed Photopolymers and Hybrid Assemblies: Expansion Mismatch, Interface Damage and Property Drift
- Statistical Size Effects and Weibull Analysis in Printed Photopolymers: Defect Populations, Gauge Volume and Design Interpretation
- Notch Sensitivity of Vat-Printed Thermosets: Root Radius, Orientation, Cure State and Fracture-Controlled Design
- Multiaxial Strength and Failure Criteria for Printed Photopolymers: Combined Loading, Anisotropy and Model Validation
- Impact and High-Rate Response of Printed Photopolymers: Strain Rate, Temperature, Specimen Geometry and Failure Mode
- Environmental Stress Cracking in Printed Photopolymers: Applied Stress, Sorption, Crazing, Crack Growth and Recovery
- Compression, Local Buckling and Crushing of Printed Photopolymer Structures: Material State, Architecture and Boundary Conditions
- Repair Coatings and Recoat Interfaces on Aged Photopolymers: Surface Reactivation, Chemical Compatibility and Structural Recovery
- Release-Layer and Demoulding-Surface Engineering for Photocurable Processes: Interfacial Energy, Wear, Fouling and Transfer Fidelity
- Plasma, Corona and UV-Ozone Treatment of Photopolymer Surfaces: Functionalisation, Ageing, Contamination and Bond Performance
- Low-Friction and Lubricious Surfaces on Printed Photopolymers: Additives, Grafts, Coatings, Migration and Wear
- Chemical Resistance and Solvent Uptake of Vat-Printed Photopolymers: Qualification Boundaries and Recovery
- Antifouling and Biofilm-Resistant Photopolymer Surfaces: Hydration Layers, Topography, Leaching and Durability
- Anti-Icing, Icephobic and Condensation-Managing Photopolymer Surfaces: Wetting State, Thermal Cycling and Service Durability
- Volatile Reactive-Diluent Loss During Handling and Cure: Composition Drift, Emissions, Surface State and Requalification
- Quantifying Photobase Generation and Latent-Anionic Cure: Base Release, Neutralisation, Step-Growth, Polyaddition and Ring-Opening Polymerisation
- Primer Chemistry for Photocurable Interfaces: Coupling Reactions, Film Thickness, Cure Compatibility and Recoat Windows
- Adhesion of Photopolymer Materials to Thermoplastics and Thermosets: Solubility Parameters, Interdiffusion, Primers and Ageing
- Adhesion of Photopolymer Materials to Glass and Ceramics: Silanisation, Hydroxylation, Moisture and Interfacial Fracture
- Adhesion of Photopolymer Coatings and Printed Features to Metals: Oxide State, Surface Preparation, Cure Stress and Durability
- Surface Functionalisation of Nano- and Microparticles for Photocurable Composites
- Reactive-Diluent Selection in Photocurable Formulations
- Pigment–Dye–Photoinitiator Competition in Coloured Photopolymers
- Optical photopolymers for additive manufacturing: reporting practices and cross-study comparability
- Oligomer Molecular Architecture in Photocurable Resins
- Moisture Tolerance of Epoxy, Oxetane and Vinyl-Ether Cationic Photoresins
- Iodonium and Sulfonium Photoacid Generators in Hybrid Radical–Cationic Systems
- Inhibitor-Package Engineering in Radical Photopolymer Formulations
- Chain-Transfer Agents in Photopolymer Networks
- Transient Thermal-History Measurement During Photopolymerisation
- Surface-Chemistry Mapping of Printed Photopolymers
- Spatial Cure-State Mapping by Raman and Infrared Spectroscopy
- Residual-Stress Measurement in Photopolymerised Parts
- Reference Artefacts and Benchmark Geometries for Additive-Manufacturing Qualification
- Radiometric and Actinometric Traceability for Photopolymer Processing
- Photoinitiator Action-Spectrum and Quantum-Yield Metrology
- Orthogonal Chemical-Identity Metrology for Photopolymer Oligomers
- Micro-Computed-Tomography Qualification of Printed Photopolymers
- Interlaboratory Round-Robin Design for Vat-Photopolymer Materials
- From Individual Reviews to a Qualification Corpus: Evidence Architecture Across Engineering Reviews ER-01 to ER-99
- Engineering Reviews ER-001 to ER-200: Corpus Scope, Evidence Architecture and Reading Guide
- Solvent, Wash-Water and Contaminated-Waste Management
- Secondary Machining of Vat-Photopolymerised Parts
- From Individual Reviews to a Second Qualification Corpus: Evidence Architecture Across Engineering Reviews ER-101 to ER-199, State Variables, Scope Boundaries, Cross-Paper Couplings and Research Priorities
- Aplicaciones de las ceras en la industria de los recubrimientos y de las tintas de impresión / Applications of Waxes in the Coatings and Printing Inks Industry
- Single-Vat Multimaterial Vat Photopolymerisation by Photochemical Addressing: Wavelength Selectivity, Dose Encoding, Reaction Orthogonality and Crosstalk
- Returned-Part Analysis for Printed Photopolymers: Reconstructing Cure State, Exposure History and Contamination from a Failed Component
- Programming Anisotropy in 4D-Printed Liquid-Crystal Elastomers: Director Alignment, Vat-Photopolymerisation Routes, Actuation Fidelity and Drift
- Photoinitiator Migration and Substitution in Vat Photopolymerisation: Spectral Compatibility, Conversion, Residual Species, Photoproducts and Qualification
- Photobase-Mediated and Base-Catalysed Photocuring in Vat Photopolymerisation: Generator Release, Michael-Addition Networks, Ring-Opening Routes, Anionic Boundaries and Latency Qualification
- Optical-State Characterisation and Drift Detection in Vat-Photopolymerisation Equipment: Spatial Irradiance, Spectrum and Divergence, and the Unclosed Ageing Question
- Methacrylated-Starch Photoresins: Botanical Source, Amylose/Amylopectin Composition, Gelatinisation, Substitution, Aqueous DLP, Hybrid Bioinks and Qualification
- Methacrylated Silk-Fibroin Photoresins: Protein Source, GMA Functionalisation, Aqueous DLP, Hydration, Mechanics, Biological State and Qualification
- Incoming Photoresin Raw Materials: Identity, Inhibitor Level, Functionality Distribution, Impurity and Lot Equivalence
- In-Can Stability, Latency and Premature Cationic Polymerisation in Light-Curable Formulations
- Evidence-to-Decision Qualification Framework for Vat Photopolymerisation
- Evidence for Material Circularity in Photopolymer Additive Manufacturing: Material-Loop Closure, Recovery Mass Balance, Recovered-Feedstock Identity and Property Retention
- Batch Compounding, Homogenisation, Filtration and Filling of Photoresins: Which Process Variables Must Be Declared and Controlled, and the Evidence That Does Not Yet Exist
- Analytical Extractables and Leachables from Vat-Printed Photopolymers: Specimen State, Extraction Design, Analytical Coverage and Cross-Study Comparability
- Interpreting Critical Exposure and Penetration Depth in Vat Photopolymerization
- Coating and Encapsulation of Reactive Photopolymer Substrates: Surface Cure State, Residual-Species Migration, Adhesion and Barrier Qualification
- Waterborne UV-Curable Dispersions: Water Removal, Coalescence, Photocure and Film-Formation Coupling
- Vat-Photopolymerised Drug-Delivery and Pharmaceutical Devices: Resin Identity, Dose Incorporation, Release, Residuals and Qualification
- Thick-Section Photocuring of Putties, Gels, Sealants and Potting Compounds: Attenuation, Frontal Cure, Exotherm and Through-Cure Qualification
- Reactive Process Safety, Exotherm and Fire Risk in Photoresin Manufacture and Use
- Radiographic-Contrast Photopolymers for Phantoms, Sample Holders and X-Ray Workflows
- Printer Changeover, Cleaning Validation and Cross-Contamination Control
- Post-Cure Process Engineering for Vat-Photopolymerised Parts: Dose Delivery, Chamber Geometry, Shadowing, Atmosphere and Thermal Coupling
- Photopolymers for Otoplastics and Hearing Devices: Shell and Earmould Mechanics, Skin-Contact State, Biofilm, Acoustics and Fit
- Photocurable Scaffolds for Cultured Meat and Food Biofabrication: Food-Grade Chemistry, Mass Transport, Texture and Process Qualification
- Packaging and Storage-Excursion Qualification for Photoresins: Container Material, Headspace Oxygen, Light Transmission and Excursion Disposition
- Oxygen Inhibition and Photon Competition in Thin Pigmented Radiation-Curable Films: Why Surface Cure Governs Graphic Ink Performance
- Network-State Metrology in Photopolymers: Gel Fraction, Effective Crosslink Density and the Non-Equivalence of Conversion, Insolubility and Modulus
- Mechanical Recycling and Reuse of Cured Photopolymer Waste: Size Reduction, Resin Reincorporation and Requalification
- Independence and Verification of Multimodal Authentication Features in Photocurable Inks and Coatings
- Formulation and Cure of Light-Curable Adhesives Across 2D, 2.5D and 3D Assemblies: Optical Access, Bondline Kinetics and Dark-Zone Control
- Exposure Verification in Industrial Photopolymer Operations: Air and Dermal Sampling, Analytical Methods, Barrier Performance and Control Confirmation
- Embedded Components and Hybrid Functional Assemblies: In-Process Embedding in Vat-Photopolymerised Parts: Pause, Placement, Resume, Interfacial Cure and Verification
- Electron-Beam versus Photoinitiated Curing of Acrylate Formulations: Network Formation Without a Photoinitiator, Depth-Dose Coupling and Requalification Boundaries
- Diagnostic Inference in Vat Photopolymerisation: Discriminating Between Competing Defect Mechanisms Under Uncertainty
- Design Values for Printed Photopolymers: Why Classical Allowables Methodology Does Not Transfer, and What Does
- Cure-Shrinkage Stress at the Coating-Substrate Interface: Substrate Modulus, Thermal Mismatch and Adhesion Failure in Radiation-Curable Coatings
- Controlled Undercure in Radiation-Curable Pressure-Sensitive Adhesives: The Conversion Window, Residual Unsaturation as a Specification, and Migration from a Permanently Soft Layer
- Accelerated Ageing and Life-Claim Validity for Printed Photopolymers: Acceleration Factors in a Material Whose State Is Still Evolving
- Optical, Photonic, Luminescent, High-Refractive-Index and Radiation-Functional 3D Materials: Scattering, Attenuation, Spectral Response and Qualification
- Nano and Micron Raw Materials for Manufacturing 2D and 3D Advanced Materials: Physical Form, Dispersion, Loading, Direct and Indirect Routes, and Qualification
- Electrically and Thermally Functional Nano/Micron Materials for Additive Manufacturing: Conductivity, ESD, EMI Shielding, Percolation, Interfaces, Anisotropy and Qualification
- Dielectric, Ferroelectric, Piezoelectric and Magnetically Functional 3D Materials: Loading, Alignment, Poling, Field Response and Device Qualification
- Non-Destructive Evaluation of Vat-Photopolymerised Parts
- Load Introduction into Vat-Photopolymerised Parts: Inserts, Threads, Press Fits and Overmoulded Interfaces
- Adhesive Bonding and Structural Joining of Printed Photopolymers
- Vat Photopolymerisation of Ceramics
- Support Strategies for Internal Channels and Sacrificial Geometries in Industrial Additive Manufacturing
- Polymer-Binder Powder-Bed Routes ER-155 Engineering Review
- From Printer Capability to Qualified Factory Route
- Ceramic and Sand Binder Jetting
- Ceramic Direct Ink Writing and Robocasting
- Bound-Ceramic Material Extrusion ER-154 Engineering Review
- Polymer Powder-Bed Additive Manufacturing: SLS, MJF, HSS and SAF
- Polymer Material Extrusion for Industrial Production: Filament FFF/FDM, Pellet Extrusion and Reactive Screw/Large-Format Extrusion
- Metal Binder Jetting: Green Strength, Depowdering, Debinding, Sintering, Shrinkage, Throughput and Qualification
- Material Jetting and Inkjet Additive Manufacturing
- Lithography-Based Metal Manufacturing: Metal-Filled Photoresins, Cure–Loading Trade-Offs, Debinding, Sintering and Qualification
- Laser Powder-Bed Fusion of Metals: Density, Geometric Freedom, Residual Stress, Supports, Productivity and Qualification
- Industrial Vat-Photopolymerisation Architectures: SLA, DLP, LCD/MSLA and Continuous Printing
- Electron-Beam Powder-Bed Fusion of Metals: Vacuum Processing, Preheating, Alloy Windows, Surface State and Qualification
- Directed-Energy Deposition and Wire-Arc Additive Manufacturing: Repair, Large-Scale Deposition, Thermal History, Machining and Qualification
- Direct Ink Writing and Paste Extrusion
- Bound-Metal Material Extrusion: Filament and Pellet Feedstocks, Green-Part Anisotropy, Debinding, Sintering and Qualification
- Photopolymer Storage, Reuse and Open-Vat State: Evidence Boundaries and Qualification Requirements
- Highly Specialised Photopolymer Resins for Extreme Service: High Temperature, Chemical Resistance, Flame Resistance, Gas Barrier, Electrical Insulation and Qualification
- Adaptive, Soft and Application-Specific 3D Resins: 4D and Shape-Memory, Self-Healing, Hydrogel, Silicone-Like, Foam, Microfluidic, High-Security and Process-Specialty Systems
- A State-Resolved Framework for Industrial Additive-Manufacturing Technology Selection Across Polymers, Metals, Ceramics and Advanced Materials
- Wettability and Capillary Flow in Vat-Printed Microfluidic Channels
- Thermal Expansion and Thermomechanical Dimensional Stability in Vat-Printed Photopolymers
- Surface Topography and Finishing of Vat-Printed Photopolymers: Roughness Metrology, Orientation, Stair-Stepping, Polishing and Functional Transfer
- Surface Metallization and Electroforming on Vat-Printed Photopolymers: Activation, Seed Layers, Adhesion, Coverage and Qualification
- Substrate and Build-Platform Adhesion in Vat Photopolymerisation: Wetting, Surface Treatment, Cure-State Coupling and Qualification
- Residual Reactants, Impurities and Manufacturing Conversion as Hidden Drivers of Photopolymer Hazard
- Photoluminescent Photopolymers in Vat Photopolymerisation: Fluorescence, Phosphorescence, Cure-Spectrum Coupling, Reabsorption, Scattering and Qualification
- Optical Waveguides and Light Guides in Vat-Printed Photopolymers: Refractive-Index Contrast, Propagation Loss, Scattering, Coupling and Qualification
- Occupational Contact Dermatitis in UV-Curable and Vat-Photopolymerisation Workflows: Exposure Routes, Sensitisation, Diagnosis and Prevention
- Monomer Structure-Hazard Relationships in Photo-Curable (Meth)acrylates: Electrophilicity, Functionality, Molecular Architecture, Cross-Reactivity and Limits of Read-Across
- Leak Testing and Seal Qualification of Vat-Printed Fluidic Components: Through-Defects, Interfaces, Pressure Decay and Bulk-Permeation Boundaries
- Historical Evidence Density and Hazard Classification of UV-Curable (Meth)acrylate Monomers
- Gas Barrier and Molecular Permeability in Vat-Printed Photopolymers: Diffusion, Sorption, Network State, Defects and Qualification
- Dynamic Mechanical Damping and Viscoelastic Energy Dissipation in Vat-Printed Photopolymers: Frequency, Temperature, Cure State, Architecture and Qualification
- Dispersant Chemistry for Photo-Curable Resins, Oligomers and Monomers in 2D, 2.5D and 3D Photopolymerisation
- Color and Appearance Metrology in Vat-Printed Photopolymers: CIELAB, CIEDE2000, Metamerism, Gloss, Surface Texture and Gonioappearance
- Charge-Transfer-Complex Photoinitiation for Visible-Light Additive Manufacturing
- CO2 Capture by Vat-Printed and Photopolymer-Derived Structures: Uptake Mechanisms, Mass Transfer, Regeneration and Qualification
- Vat-Photopolymerised Water-Soluble Sacrificial Tooling for Ceramic and Metal Powder Injection Moulding: Process-Class Boundaries, Intricate Geometry, Aqueous Removal and Qualification Requirements
- Vat-Photopolymerised Materials for Custom Orthoses and Prosthetic Interfaces: Device Mechanics, Workflow Qualification and Evidence Boundaries
- Vat Photopolymerisation of High-Molecular-Weight Polymer Latexes: Colloidal Printability, Scaffold Formation, Coalescence and Pseudothermoplastic Reprocessing
- True Foam Photopolymers for Vat Photopolymerisation: Foaming Routes, Network Mobility and Cellular-Structure Qualification
- Toughening Mechanisms in Vat-Photopolymerised Thermosets: Network Topology, Phase Morphology, Reinforcement and Process Trade-Offs
- Thiol–Ene and Thiol–Yne Photopolymerisation in VPP: Stoichiometry, Oxygen Response and Network Architecture
- Sequential Dual-Cure Networks in Vat Photopolymerisation: Geometry Fixation, Secondary Network Formation and Property Homogenisation
- Polymerisation-Induced Phase Separation in Vat Photopolymerisation: Kinetic Competition, Morphology Arrest and Functional Microstructure
- Photocuring Pathway Taxonomy for Vat Photopolymerisation: Active Species, Network-Formation Modes, Spatial Gating and Qualification Boundaries
- Optical Attenuation and Cure-Profile Physics in Particle-Filled Vat Photopolymerisation: Absorption, Scattering, Refractive-Index Contrast and Feature Broadening
- Online Configuration of Multifunctional Photopolymer Systems: A Multivariable, Multiobjective Framework for Vat Photopolymerisation
- Mechanistic Atlas of Photocuring Pathways in Vat Photopolymerisation: From Optical Trigger to Network Formation and Structural Evolution
- Material Operating Windows in Tomographic Volumetric Additive Manufacturing: Gelation Criteria, Inhibition Reserve, Optical Transport and Exposure Drift
- Magnetically Functional Photopolymer Composites in Vat Photopolymerisation: Filler Dispersion, Cure Coupling, Magnetic State and Field-Programmed Response
- Long-Wavelength and Superlinear Photoinitiation in Vat Photopolymerisation: Action Spectra, Photon Upconversion, Curing Contrast and Qualification
- Living and Reactivatable Polymer Networks in Vat Photopolymerisation: RAFT, Photoiniferter and Nitroxide-Mediated Post-Print Growth
- Interlayer Cohesion and Mechanical Anisotropy in Vat-Photopolymerised Thermosets: Cure Overlap, Network Continuity and Qualification
- In-Situ Monitoring and Closed-Loop Control in Vat Photopolymerisation: Sensors, State Estimation, Digital Twins and Adaptive Exposure
- In-Can Stability and Premature Polymerisation in Radiation-Curable Formulations: Inhibitor Mechanisms, Residual Acidity, Thiol Chemistry, Pigment/Filler Effects, Metallic-Ink Instability, Packaging Redox and Thermal Transport Risk
- Hierarchical and Double-Network Hydrogels in Vat Photopolymerisation: Microgel Reinforcement, Interpenetration and Energy Dissipation
- Gelation, Vitrification and Mobility Arrest in Vat Photopolymerisation: From Network Percolation to Diffusion-Controlled Cure
- Fracture Toughness and Damage Tolerance in Vat-Photopolymerised Thermosets: Crack Preparation, Cure State, Anisotropy and Qualification
- Fatigue-Crack Growth and Subcritical Fracture in Vat-Photopolymerised Thermosets: Crack Preparation, Cyclic Driving Force, Environment and Qualification
- Environmental Ageing and Property Retention in Vat Photopolymerisation: Resin Storage, Photooxidation, Hydrothermal Conditioning and State-Resolved Qualification
- Dual-Colour Photoinitiator Design Space for Xolography: Photochemical Requirements, Molecular Variability, Patent Boundaries and Resin-Matrix Opportunities
- Covalent Adaptable Networks and Vitrimer Topology in Vat Photopolymerisation: Exchange Kinetics, Reprocessing and Dimensional Stability
- Cleavable and Depolymerisable Networks in Vat Photopolymerisation: Triggered Disassembly, Fragment Identity and Closed-Loop Qualification
- Cationic Ring-Opening Photopolymerisation in VPP: Photoacid Generation, Dark Cure, Humidity and Epoxy/Oxetane Network Formation
- Wavelength-Matched Process Control as a Prerequisite for the Post-TPO Photopolymer Transition
- Water-Soluble Sacrificial Portfolio (IM-WS) for SLA, DLP and LCD
- Washing- and Drying-Induced Extraction, Property Change and Dimensional Response in Vat-Printed Photopolymers
- Volumetric additive manufacturing — tomographic photopolymer 3D printing
- Vat photopolymerisation process control — the 3Dresyns CRT System
- UV and EB nanoimprint lithography — the 3Dresyns NMF photoresist family
- UHV Bio Portfolio for Viscous Lithography Manufacturing and Hot Lithography
- Two-photon polymerization — sub-100 nm photopolymer 3D printing
- Tribology and Wear Qualification of Vat-Printed Parts: Tribosystem Definition, Measurement and Transfer Limits
- Thermal Conductivity in Vat-Photopolymerised Composites: Formulation, Anisotropy and Measurement
- The MF Biocompatible VPP Framework — Monomer-Free Formulation as a Regulatory Engineering Strategy
- The 3Dresyns Wedge Method
- The 3Dresyns Structured Selection Framework (SSF)
- The 3Dresyns Fine Tuner system
- Sustainability in Vat Photopolymerization
- Sterilisation of Vat-Printed Photopolymers: Dimensional Evidence and Qualification Gaps
- Silicone-like and PDMS-like VPP Photopolymers
- Separation and Peel Mechanics in Bottom-Up VPP: A Qualification and Minimum-Reporting Note
- Rheology, Recoating and Dispersion Control of Highly Filled VPP Suspensions
- Reactive Reinforced Composites
- Radiopaque and Radio-Transparent VPP Photopolymers
- Processing Auxiliaries
- Post-processing and cleaning chemistry for VPP — from print to validated part
- Photocurable Putties and UV Adhesives — the 3Dresyns Non-Printed Functional Family
- Photoabsorbing Fillers, Optical Response and Cure-Depth Control in Vat Photopolymerisation
- Perfect Cast Castable Portfolio for SLA, DLP and LCD
- Oxygen Inhibition and Free-Surface/Interfacial Cure in VPP: A Qualification and Minimum-Reporting Note
- Outgassing and Vacuum Qualification of Photopolymer Materials and Vat-Printed Parts
- Optics and Photonics
- Optical Selection System (OSS)
- OTO Hearing Device and Dental Photopolymers
- Multimaterial VPP Interfaces and Functionally Graded Networks: Qualification and Failure-Mode Controls
- Mold-Making Resins for Indirect Manufacturing — the 3Dresyns IM Family
- Microfluidic inkjet photopolymers — the 3Dresyns IJ MF portfolio
- MF Bio dental portfolio for SLA, DLP and LCD — verified resin selection by clinical indication
- LMM Reactive Solid Binders and Castable Solid Photopolymers — RSB1 WD, RSB1 SD, LMM Perfect Cast PC1, PC2 and PC3
- Jewelry and Arts
- Innovation Timeline — 3Dresyns® Photopolymer and Powder Platform 2017–2025
- Inkjet supports and auxiliaries — removal-route engineering for material jetting workflows
- Inkjet Photopolymers — Standard, NextGen TF and Specialty Grades
- Inkjet Castable Photopolymers and Waxes — IJ Perfect Cast, Red Flexible Wax, Cyan Rigid Wax
- Industrial Implementation of a Material–Process–Workflow Framework in Dental and Hearing-Device Photopolymer Additive Manufacturing
- High-Security VPP Photopolymers
- Forward Directions 2025–2030 — Five 3Dresyns® Innovation Tracks Already in Public Development
- Flame-Retardant Vat-Photopolymer Composites: Evidence Limits and Test Architecture
- Fine Tuners
- Fatigue and Time-Dependent Deformation in Vat-Printed Thermosets: A Qualification and Evidence-Gap Note
- Engineering selection of VPP photopolymers — the 3Dresyns SMSP
- Engineering & Functional VPP Portfolio for SLA, DLP and LCD
- Electrically Functional Photopolymer Resins for Vat Photopolymerization
- Education and Research
- ESD-dissipative VPP photopolymers — the 3Dresyns electronics portfolio
- Direct and Indirect Additive Manufacturing for Advanced Ceramics and Metals: Evidence-Based Route Selection
- Debinding Defect Formation in Photopolymer-Derived Ceramic and Metal Green Bodies
- Cure Shrinkage, Residual Stress and Warpage in VPP: A Qualification and Minimum-Reporting Note
- Conductive and Electronics 3D Resins
- Color Stability and Light Fastness
- Cold Fusion SLS Powder Binders for CMF, CCF, CPF and CEPF - the 3Dresyns Powder-Binder Family
- Circular Economy in VPP — Recyclable Powder, IPA-Free Cleaning and Biodegradable End-of-Life
- Biomedical Photopolymer Materials for Professional Manufacturing Workflows — the 3Dresyns Biomedical Platform
- Biodegradable VPP Photopolymers — BioDeg Corn Series
- Biocompatibility in Dental Photopolymer Additive Manufacturing: A Material–Process–Workflow Perspective
- Bio-based VPP photopolymers
- Bio-Scaffolds Portfolio for SLA, DLP and LCD
- Aerospace and Space Manufacturing
- Advanced Dental VPP — Clear and Coloured Photopolymer Families for Guides, Splints, Aligners, Denture Bases, Crowns and Implant Workflows
- Additively Manufactured Investment-Casting Patterns: Burnout, Shell Compatibility and Accepted-Casting Qualification
- 4D Shape-Memory VPP Photopolymers
- 4D Photopolymer Actuation: Qualification Limits for Biomedical Translation
- 3Dresyns Colors Portfolio
- 3Dresyn PEEK-like — Polyetheretherketone-like VPP Photopolymer with Ultra-High Flexural Strength 120–140 MPa
- A study of the effect of several extenders on the properties of white water-based corrugated flexographic inks
- Photochemical Characteristics and Design of Synergistic Photoinitiator Combinations for UV Curable Inks and Coatings
The Universe and Its Observers
- Conceptual Breaks: Youth edition / Rupturas conceptuales: Edición juvenil
- Conceptual Breaks: Scientific edition / Rupturas conceptuales: Edición científica
- Conceptual Breaks: General reader edition / Rupturas conceptuales: Edición para público general
- Conceptual Breaks: Children's edition / Rupturas conceptuales: Edición infantil
- BRK-019 · The adult brain becomes a changing system / BRK-019 · El cerebro adulto se convierte en un sistema cambiante
- BRK-018 · Remembering becomes reconstruction / BRK-018 · Recordar se convierte en reconstruir
- BRK-017 · Making sensation measurable: psychophysics and mental chronometry / BRK-017 · Hacer medible la sensación: psicofísica y cronometría mental
- BRK-016 · Formal proof encounters internal limits / BRK-016 · La demostración formal encuentra límites internos
- BRK-015 · Immunity becomes selection among biological variants / BRK-015 · La inmunidad se convierte en selección entre variantes biológicas
- BRK-014 · Evolution without an adaptive explanation for every change / BRK-014 · Evolución sin una explicación adaptativa para cada cambio
- BRK-013 · Deciphering the genetic code: 1954 to 1966 / BRK-013 · Descifrar el código genético: de 1954 a 1966
- BRK-012 · Discrete genes and continuous variation: a statistical reconciliation / BRK-012 · Genes discretos y variación continua: una reconciliación estadística
- BRK-011 · From electrodynamic infinities to Wilson's scales / BRK-011 · De los infinitos electrodinámicos a las escalas de Wilson
- BRK-010 · Deterministic laws cease to guarantee practical prediction / BRK-010 · Las leyes deterministas dejan de garantizar la predicción práctica
- BRK-009 · Quantum foundations become experimentally discriminable / BRK-009 · Los fundamentos cuánticos pasan a ser distinguibles experimentalmente
- BRK-008 · Testing gravity: 1915 to 1975 / BRK-008 · Poner a prueba la gravedad: de 1915 a 1975
- BRK-007 · Giant molecules become a chemical possibility / BRK-007 · Las moléculas gigantes se convierten en una posibilidad química
- BRK-006 · Infinity becomes an object of exact comparison / BRK-006 · El infinito se convierte en objeto de comparación exacta
- BRK-005 · Geometry no longer has one inevitable form / BRK-005 · La geometría deja de tener una única forma inevitable
- BRK-004 · Cells become units of living organization / BRK-004 · Las células se convierten en unidades de organización viva
- BRK-003 · Life becomes open to physicochemical explanation / BRK-003 · La vida se abre a la explicación fisicoquímica
- BRK-002 · Extinction becomes a fact of natural history / BRK-002 · La extinción se convierte en un hecho de la historia natural
- BRK-001 · Motion without a continuous mover / BRK-001 · Movimiento sin un motor continuo
- Simple Questions, Deep Answers: Youth edition / Preguntas sencillas, respuestas profundas: Edición juvenil
- Simple Questions, Deep Answers: Scientific edition / Preguntas sencillas, respuestas profundas: Edición científica
- Simple Questions, Deep Answers: General reader edition / Preguntas sencillas, respuestas profundas: Edición para público general
- Simple Questions, Deep Answers: Children's edition / Preguntas sencillas, respuestas profundas: Edición infantil
- QUE-048: What can pain relief reveal about an octopus's experience? / ¿Qué puede revelar el alivio del dolor sobre la experiencia de un pulpo?
- QUE-047: How can a positive test be wrong? / ¿Cómo puede ser erróneo un resultado positivo?
- QUE-046: Why can adding a road make traffic worse? / ¿Por qué añadir una carretera puede empeorar el tráfico?
- QUE-045: Can a shape have finite area and infinite perimeter? / ¿Puede una figura tener área finita y perímetro infinito?
- QUE-044: How can we know that a knot cannot be undone? / ¿Cómo podemos saber que un nudo no se puede deshacer?
- QUE-043: Is there a largest prime number? / ¿Existe un número primo mayor que todos los demás?
- QUE-042: How can we understand speech in a noisy room? / ¿Cómo podemos entender el habla en una sala ruidosa?
- QUE-041: Why can a crowd start clapping in time? / ¿Por qué puede un público empezar a aplaudir al mismo ritmo?
- QUE-040: How do we recognise intelligence in an animal very different from us? / ¿Cómo reconocemos la inteligencia de un animal muy diferente de nosotros?
- QUE-039: How can birds find their way across an ocean? / ¿Cómo pueden orientarse las aves sobre un océano?
- QUE-038: How do children learn words they have never been taught? / ¿Cómo aprenden los niños palabras que nadie les ha enseñado?
- QUE-037: Why can an hour feel short or long? / ¿Por qué una hora puede parecernos corta o larga?
- QUE-036: Why can a smell bring back a memory? / ¿Por qué un olor puede evocar un recuerdo?
- QUE-035: Can two different lights look like the same colour? / ¿Pueden dos luces distintas parecer del mismo color?
- QUE-034: Why do we not notice the blind spot in our vision? / ¿Por qué no notamos el punto ciego de nuestra visión?
- QUE-033: Why do we need sleep? / ¿Por qué necesitamos dormir?
- QUE-032: Why do living things age at different rates? / ¿Por qué los seres vivos envejecen a ritmos distintos?
- QUE-031: How does a developing organism find its shape? / ¿Cómo adquiere su forma un organismo en desarrollo?
- QUE-030: How can cells with the same DNA do different jobs? / ¿Cómo pueden realizar distintas funciones células con el mismo ADN?
- QUE-029: Why are siblings different? / ¿Por qué son diferentes los hermanos?
- QUE-028: Why does sexual reproduction persist? / ¿Por qué persiste la reproducción sexual?
- QUE-027: Why can resistance persist after we stop using an antibiotic? / ¿Por qué puede persistir la resistencia tras dejar de usar un antibiótico?
- QUE-026: How can a seed remain alive without growing? / ¿Cómo puede una semilla seguir viva sin crecer?
- QUE-025: Where does a tree get most of its dry mass? / ¿De dónde obtiene un árbol la mayor parte de su masa seca?
- QUE-024: Why are many leaves green? / ¿Por qué muchas hojas son verdes?
- QUE-023: Why can a flame go out while fuel remains? / ¿Por qué puede apagarse una llama aunque quede combustible?
- QUE-022: Why can losing one species change an ecosystem? / ¿Por qué la pérdida de una especie puede cambiar un ecosistema?
- QUE-021: Can a forest keep absorbing carbon forever? / ¿Puede un bosque seguir absorbiendo carbono indefinidamente?
- QUE-020: Why do rivers bend? / ¿Por qué los ríos forman curvas?
- QUE-019: How can we estimate a future climate without knowing each day's weather? / ¿Cómo podemos estimar el clima futuro sin conocer el tiempo de cada día?
- QUE-018: Why is predicting an earthquake so difficult? / ¿Por qué es tan difícil predecir un terremoto?
- QUE-017: Why are sea fossils found high in mountains? / ¿Por qué se encuentran fósiles marinos en lo alto de las montañas?
- QUE-016: Why is the ocean salty while rain is not? / ¿Por qué el océano es salado y la lluvia no?
- QUE-015: Why does lightning take a branching path? / ¿Por qué los rayos siguen trayectorias ramificadas?
- QUE-014: How can a cloud stay in the air? / ¿Cómo puede una nube mantenerse en el aire?
- QUE-013: Why does the Moon show us nearly the same face? / ¿Por qué la Luna nos muestra casi siempre la misma cara?
- QUE-012: Why is summer not caused by being closer to the Sun? / ¿Por qué el verano no se debe a estar más cerca del Sol?
- QUE-011: Why are there often two high tides a day? / ¿Por qué suele haber dos pleamares al día?
- QUE-010: Why does the Moon not fall onto Earth? / ¿Por qué la Luna no cae sobre la Tierra?
- QUE-009: Why does a magnet attract some metals but not others? / ¿Por qué un imán atrae algunos metales y otros no?
- QUE-008: Why does a battery run out? / ¿Por qué se agota una batería?
- QUE-007: Why can we see through glass but not metal? / ¿Por qué podemos ver a través del vidrio, pero no del metal?
- QUE-006: Why does soap help remove grease? / ¿Por qué el jabón ayuda a eliminar la grasa?
- QUE-005: Why can friction both stop us and help us walk? / ¿Por qué el rozamiento puede frenarnos y ayudarnos a caminar?
- QUE-004: Can two people see the same rainbow? / ¿Pueden dos personas ver el mismo arcoíris?
- QUE-003: Why is the daytime sky blue? / ¿Por qué el cielo es azul de día?
- QUE-002: Why does ice float? / ¿Por qué flota el hielo?
- QUE-001: Why does metal feel colder than wood? / ¿Por qué el metal se siente más frío que la madera?
- Pioneers of Knowledge: Youth Edition / Pioneros del conocimiento: Edición juvenil
- Pioneers of Knowledge: General Reader Edition / Pioneros del conocimiento: Edición para público general
- Pioneers of Knowledge: Children's Edition / Pioneros del conocimiento: Edición infantil
- Pioneers of Knowledge: Scientific Edition / Pioneros del conocimiento: Edición científica
- PIO-092: Modern detectors and the invisible universe / Detectores modernos y el universo invisible
- PIO-091: Climate science and knowledge of a coupled planet / Ciencia del clima y conocimiento de un planeta acoplado
- PIO-090: Networks, simulation and machine learning / Redes, simulación y aprendizaje automático
- PIO-089: Plate tectonics: mechanism, synthesis and converging evidence / Tectónica de placas: mecanismo, síntesis y evidencia convergente
- PIO-088: Satellites and the planetary point of view / Satélites y la perspectiva planetaria
- PIO-087: DNA and molecular heredity / ADN y herencia molecular
- PIO-086: Research ethics, consent and the limits of permissible inquiry / Ética de la investigación, consentimiento y límites de la investigación permisible
- PIO-085: Randomised trials and statistical inference / Ensayos aleatorizados e inferencia estadística
- PIO-084: Shannon and measurable information / Shannon y la información cuantificable
- PIO-083: Nuclear physics, nuclear energy and dual-use knowledge / Física nuclear, energía nuclear y conocimiento de doble uso
- PIO-082: Turing and programmable computation / Turing y la computación programable
- PIO-081: Antibiotics and experimental control of infection / Antibióticos y control experimental de la infección
- PIO-080: Quantum mechanics and the limits of classical description / Mecánica cuántica y los límites de la descripción clásica
- PIO-079: Noether, symmetry and conservation / Noether, simetría y conservación
- PIO-078: Leavitt, Slipher, Lemaître and Hubble: the expanding universe / Leavitt, Slipher, Lemaître y Hubble: el universo en expansión
- PIO-077: Wegener and continental drift / Wegener y la deriva continental
- PIO-076: Einstein and spacetime / Einstein y el espacio-tiempo
- PIO-075: X-rays, radioactivity and the measurable atom / Rayos X, radiactividad y el átomo medible
- PIO-074: Electrical networks and technological systems / Redes eléctricas y sistemas tecnológicos
- PIO-073: Public literacy, newspapers and scientific debate / Alfabetización pública, prensa y debate científico
- PIO-072: Telegraph and radio: knowledge travelling faster than people / Telégrafo y radio: conocimiento que viaja más rápido que las personas
- PIO-071: Mendeleev and periodic organisation / Mendeleev y la organización periódica
- PIO-070: Photography and spectroscopy: instruments that remember light / Fotografía y espectroscopia: instrumentos que recuerdan la luz
- PIO-069: Pasteur, Lister and Koch: from antiseptic intervention to germ proof / Pasteur, Lister y Koch: de la intervención antiséptica a la demostración microbiana
- PIO-068: Mendel and statistical regularity in heredity / Mendel y la regularidad estadística de la herencia
- PIO-067: Maxwell and electromagnetic unification / Maxwell y la unificación electromagnética
- PIO-066: Darwin, Wallace and common descent / Darwin, Wallace y la ascendencia común
- PIO-065: Semmelweis, Snow and evidence from patterns / Semmelweis, Snow y la evidencia a partir de patrones
- PIO-064: Faraday and field-based physics / Faraday y la física de campos
- PIO-063: Thermodynamics and energy accounting / Termodinámica y contabilidad de la energía
- PIO-062: Dalton, atoms and chemical combination / Dalton, los átomos y la combinación química
- PIO-061: Volta and reproducible electrochemical sources / Volta y las fuentes electroquímicas reproducibles
- PIO-060: Geology and deep time / Geología y tiempo profundo
- PIO-059: Lavoisier and quantitative chemical transformation / Lavoisier y la transformación química cuantitativa
- PIO-058: From variolation to vaccination / De la variolación a la vacunación
- PIO-057: Steam engines: when technology preceded theory / Máquinas de vapor: cuando la tecnología precedió a la teoría
- PIO-056: Probability, censuses and error: Pascal to Quetelet / Probabilidad, censos y error: de Pascal a Quetelet
- PIO-055: Longitude, clocks and precision time / Longitud, relojes y tiempo de precisión
- PIO-054: Calculus, limits and infinitesimals / Cálculo, límites e infinitesimales
- PIO-053: Newton, mechanics and universal gravitation / Newton, la mecánica y la gravitación universal
- PIO-052: Microscopy, cells and microorganisms / Microscopía, células y microorganismos
- PIO-051: Academies, journals and the public experiment / Academias, revistas y el experimento público
- PIO-050: Bacon, Descartes and explicit method / Bacon, Descartes y el método explícito
- PIO-049: Galileo and controlled measurement / Galileo y la medición controlada
- PIO-048: Kepler and mathematical laws of motion / Kepler y las leyes matemáticas del movimiento
- PIO-047: Tycho Brahe and precision observation / Tycho Brahe y la observación de precisión
- PIO-046: Copernicus and heliocentric re-ordering / Copérnico y la reordenación heliocéntrica
- PIO-045: Vesalius and anatomical observation / Vesalio y la observación anatómica
- PIO-044: Renaissance humanism, perspective and printing / Humanismo, perspectiva e imprenta renacentistas
- PIO-043: Glass, lenses and the extension of vision / Vidrio, lentes y extensión de la visión
- PIO-042: Maps, coordinates and the representation of space / Mapas, coordenadas y representación del espacio
- PIO-041: Medieval universities and organised disputation / Universidades medievales y debate organizado
- PIO-040: How numerals travelled: India, Baghdad and Pisa / Cómo viajaron los numerales: India, Bagdad y Pisa
- PIO-039: Polynesian and Indigenous wayfinding / Navegación polinesia e indígena
- PIO-038: Chinese engineering, compass and gunpowder traditions / Ingeniería china, brújula y tradiciones de la pólvora
- PIO-037: East Asian printing and knowledge multiplication / Impresión de Asia oriental y multiplicación del conocimiento
- PIO-036: Hippocratic, Galenic, Ayurvedic and Islamic medicine: systematic clinical knowledge / Medicina hipocrática, galénica, ayurvédica e islámica: conocimiento clínico sistemático
- PIO-035: Al-Biruni and geodesy / Al-Biruni y la geodesia
- PIO-034: Ibn al-Haytham and experimental optics / Ibn al-Haytham y la óptica experimental
- PIO-033: Al-Khwarizmi and algebraic procedures / Al-Juarismi y los procedimientos algebraicos
- PIO-032: Translation, commentary and original science in the Islamic world / Traducción, comentario y ciencia original en el mundo islámico
- PIO-031: Indian zero, positional notation and astronomy / Cero indio, notación posicional y astronomía
- PIO-030: Maya zero and calendrical astronomy / Cero maya y astronomía calendárica
- PIO-029: Chinese paper and inexpensive external memory / El papel chino y la memoria externa accesible
- PIO-028: Ptolemy and predictive mathematical astronomy / Ptolomeo y la astronomía matemática predictiva
- PIO-027: Hipparchus and quantitative astronomy / Hiparco y la astronomía cuantitativa
- PIO-026: Eratosthenes and the size of Earth / Eratóstenes y el tamaño de la Tierra
- PIO-025: Aristarchus and Solar-System scale / Aristarco y la escala del sistema solar
- PIO-024: Eudoxus, Archimedes and exhaustion methods / Eudoxo, Arquímedes y los métodos de agotamiento
- PIO-023: Deductive proof: what Greek geometers added / Demostración deductiva: la aportación de los geómetras griegos
- PIO-022: Money, accounting and trust beyond personal relationships / Moneda, contabilidad y confianza más allá de las relaciones personales
- PIO-021: Roads, logistics and organised information / Caminos, logística e información organizada
- PIO-020: African iron metallurgy and regional innovation / Metalurgia africana del hierro e innovación regional
- PIO-019: Calendars, seasons and agricultural risk / Calendarios, estaciones y riesgo agrícola
- PIO-018: Babylonian mathematical astronomy and sexagesimal place value / Astronomía matemática babilónica y valor posicional sexagesimal
- PIO-017: Egyptian surveying and geometry / Agrimensura y geometría egipcias
- PIO-016: Laws, contracts and institutional memory / Leyes, contratos y memoria institucional
- PIO-015: Weights, measures and standards / Pesos, medidas y estándares
- PIO-014: Cuneiform accounting, writing and external memory / Contabilidad cuneiforme, escritura y memoria externa
- PIO-013: Copper and bronze metallurgy / Metalurgia del cobre y del bronce
- PIO-012: Wheel, axle and transport / Rueda, eje y transporte
- PIO-011: Fermentation, preservation and accumulated empirical knowledge / Fermentación, conservación y conocimiento empírico acumulado
- PIO-010: Animal domestication and pastoral knowledge / Domesticación animal y conocimiento pastoril
- PIO-009: Agriculture in multiple independent centres / Agricultura en múltiples centros independientes
- PIO-008: Pottery, containers and controlled transformation / Cerámica, recipientes y transformación controlada
- PIO-007: Indigenous landscape management and controlled burning / Gestión indígena del paisaje y uso controlado del fuego
- PIO-006: Rivers, coasts and early navigation / Ríos, costas y navegación temprana
- PIO-005: Clothing, fibres and environmental adaptation / Ropa, fibras y adaptación ambiental
- PIO-004: Language, symbols and shared abstraction / Lenguaje, símbolos y abstracción compartida
- PIO-003: Controlled fire, cooking and shared learning / Fuego controlado, cocina y aprendizaje compartido
- PIO-002: Stone tools and cumulative design / Herramientas de piedra y diseño acumulativo
- PIO-001: Cooperation and cumulative culture / Cooperación y cultura acumulativa
- PIO-000: Pioneers of Knowledge — Master Index and Publication Standard / Pioneros del conocimiento — Índice maestro y norma de publicación
- The Universe Observing Itself / El Universo Observándose a Sí Mismo
- CHO-015: Cryogenian Worlds and the Appearance of Animals / Mundos criogénicos y la aparición de los animales
- CHO-014: Eukaryotes, Endosymbiosis, and Complex Organisation / Eucariotas, endosimbiosis y organización compleja
- CHO-013: Oxygen Transforms Earth / El oxígeno transforma la Tierra
- CHO-012: Archean Earth, Microbial Worlds, and Photosynthesis / La Tierra arcaica, los mundos microbianos y la fotosíntesis
- CHO-011: The Earliest Evidence of Life / La evidencia más antigua de vida
- CHO-009: The Hadean Earth System / El sistema terrestre hadeano
- CHO-008: The Formation of the Sun, Planets, Earth, and Moon / La formación del Sol, los planetas, la Tierra y la Luna
- CHO-007: The Cosmic Origins of the Elements / Los orígenes cósmicos de los elementos
- CHO-006: Galaxies, the Cosmic Web, and Stellar Generations / Galaxias, la red cósmica y generaciones estelares
- CHO-005: Dark Ages, First Stars, Early Galaxies, and Reionization / Edades oscuras, primeras estrellas, galaxias tempranas y reionización
- CHO-004: Plasma, Atoms, and the Release of the Cosmic Microwave Background / Plasma, átomos y la liberación del fondo cósmico de microondas
- CHO-003: The Formation of the First Nuclei / La formación de los primeros núcleos
- CHO-002: Particle Epochs and Thermal Transitions / Épocas de partículas y transiciones térmicas
- CHO-001: The Earliest Reconstructible Universe / El universo reconstruible más antiguo
- CHO-000: Cosmic History and Its Observers: Purpose, Structure, and Reading Guide / Historia cósmica y sus observadores: propósito, estructura y guía de lectura
- Ways of Knowing: Youth Edition / Formas de conocer: Edición juvenil
- Ways of Knowing: Scientific Edition / Formas de conocer: Edición científica
- Ways of Knowing: General Reader Edition / Formas de conocer: Edición para público general
- Ways of Knowing: Children's Edition / Formas de conocer: Edición infantil
- KNO-024: Lost Knowledge and Preservation Bias / Conocimiento perdido y sesgo de conservación
- KNO-023: How Groups Know More Than Individuals / Cómo los grupos saben más que los individuos
- KNO-022: Computation as External Memory / La computación como memoria externa
- KNO-021: Open Science and Reproducibility / Ciencia abierta y reproducibilidad
- KNO-020: Review, Consensus and Disagreement / Revisión, consenso y desacuerdo
- KNO-019: Data, Tables and Records / Datos, tablas y registros
- KNO-018: Images, Diagrams and Visualisation / Imágenes, diagramas y visualización
- KNO-017: Is Mathematics a Language? / ¿Son las matemáticas un lenguaje?
- KNO-016: How Evidence Is Built: Putting the Tools Together / Cómo se construye la evidencia: integrando las herramientas
- KNO-015: Uncertainty and Probability / Incertidumbre y probabilidad
- KNO-014: Causality and Correlation / Causalidad y correlación
- KNO-013: Models, Maps and Reality / Modelos, mapas y realidad
- KNO-012: Experiments and Variable Control / Experimentos y control de variables
- KNO-011: Measuring Before Theorising / Medir antes de teorizar
- KNO-010: Classification as a Knowledge Tool / La clasificación como herramienta de conocimiento
- KNO-009: Archives, Libraries and Collective Memory / Archivos, bibliotecas y memoria colectiva
- KNO-008: Instruments That Extend the Senses / Instrumentos que amplían los sentidos
- KNO-007: Calendars and Time Measurement / Calendarios y medida del tiempo
- KNO-006: Maps and Spatial Representation / Mapas y representación espacial
- KNO-005: Oral Language and Transmission / Lenguaje oral y transmisión
- KNO-004: From Symbols to Writing / De los símbolos a la escritura
- KNO-003: From Marks to Symbols / De las marcas a los símbolos
- KNO-002: Counting Before Numbers / Contar antes de los números
- KNO-001: A Mark on a Stone / Una marca en una piedra
- The Universe and Its Observers: IDE-000 How to Read the Fundamental Ideas Series / El universo y sus observadores: IDE-000 Cómo leer la serie Ideas Fundamentales
- The Universe and Its Observers: IDE Youth Edition / El universo y sus observadores: edición juvenil IDE
- The Universe and Its Observers: IDE Scientific Edition / El universo y sus observadores: edición científica IDE
- The Universe and Its Observers: IDE General Reader Edition / El universo y sus observadores: edición IDE para público general
- The Universe and Its Observers: IDE Children's Edition / El universo y sus observadores: edición infantil IDE
- What Is a Signal? / ¿Qué es una señal?
- What Is a Particle? / ¿Qué es una partícula?
- What Is a Field? / ¿Qué es un campo?
- What Is Observation? / ¿Qué es la observación?
- What Is Light? Wave, Quantum and Observer / ¿Qué es la luz? Onda, cuanto y observador
- What Does Mass Mean? / ¿Qué significa la masa?
- Uncertainty: Naming the Sources Before Adding Them / Incertidumbre: nombrar las fuentes antes de sumarlas
- Time: Clocks, Order and the Arrow / Tiempo: relojes, orden y la flecha
- Symmetry: Transformations, Invariants and Broken States / Simetría: transformaciones, invariantes y estados rotos
- Selection: How Differential Persistence Accumulates Structure / Selección: cómo la persistencia diferencial acumula estructura
- Scale: Which Details Matter at Which Level? / Escala: ¿qué detalles importan en cada nivel?
- Representation: When One Thing Stands For Another / Representación: cuando una cosa está por otra
- Probability: A Calculus for Uncertain Alternatives / Probabilidad: un cálculo para alternativas inciertas
- Model: An Inference Machine With a Domain / Modelo: una máquina de inferencia con dominio
- Measurement: From Indication to Value / Medición: de la indicación al valor
- Information: Quantifying Alternatives and Dependence / Información: cuantificar alternativas y dependencia
- Field: Quantities Spread Over a Domain / Campo: magnitudes distribuidas en un dominio
- Feedback: When Output Returns as Input / Retroalimentación: cuando la salida vuelve como entrada
- Entropy: Counting, Constraint and Irreversibility / Entropía: conteo, restricciones e irreversibilidad
- Energy: A Conserved Account, Not a Substance / Energía: una cuenta conservada, no una sustancia
- Emergence: When Collective Patterns Become Explanatory / Emergencia: cuando los patrones colectivos se vuelven explicativos
- Connection: What an Edge Claims / Conexión: qué afirma una arista
- Complexity: Several Questions Wearing One Word / Complejidad: varias preguntas bajo una palabra
- Causality: Intervention, Counterfactuals and Physical Influence / Causalidad: intervención, contrafactuales e influencia física
- From Quarks to Consciousness: Scientific Edition / Del quark a la consciencia: edición científica
- Maxwell: Thinking the Invisible / Maxwell: Pensar lo invisible
- QTC-026 — The Cell Within the Cell / La célula dentro de la célula
- From Quarks to Consciousness: 27 Big Questions (Youth Edition) / Del quark a la consciencia: 27 grandes preguntas (edición juvenil)
- From Quarks to Consciousness: 27 Big Questions (General Reader Edition) / Del quark a la consciencia: 27 grandes preguntas (edición para público general)
- From Quarks to Consciousness: 27 Big Questions (Children's Edition) / Del quark a la consciencia: 27 grandes preguntas (edición infantil)
- QTC-027 — From Information to Inheritance: Tree, Web and Viruses / De la información a la herencia: árbol, red y virus
- QTC-025 — How to Read an Atmosphere from a Rock / Cómo leer una atmósfera en una roca
- QTC-024 — The Microbial Planet / El planeta microbiano
- QTC-023 — LUCA: The Ancestor We Reconstructed / LUCA: el antepasado que reconstruimos
- QTC-022 — The First Cells We Never Saw / Las primeras células que nunca vimos
- QTC-021 — When Chemistry Began to Evolve / Cuando la química empezó a evolucionar
- QTC-020 — Before Life: A Planet Full of Chemistry / Antes de la vida: un planeta lleno de química
- QTC-019 — Earth's Thermostat / El termostato de la Tierra
- QTC-018 — The Planet That Moves / El planeta que se mueve
- QTC-017 — How We Learned to Date the Past / Cómo aprendimos a fechar el pasado
- QTC-016 — How to Build a Planet / Cómo se construye un planeta
- QTC-015 — The Stars We Have Never Seen / Las estrellas que nunca hemos visto
- QTC-014 — Matter, Antimatter and an Unsolved Imbalance / Materia, antimateria y un desequilibrio sin resolver
- QTC-013 — Before Atoms / Antes de los átomos
- QTC-012 — What Do We Really Mean by the Big Bang? / ¿Qué queremos decir realmente cuando hablamos del Big Bang?
- QTC-011 — The Oldest Light We Can See / La luz más antigua que podemos observar
- QTC-010 — Random Variation and a Filter / Variación al azar y un filtro
- QTC-009 — What Do We Actually Mean by Life? / ¿Qué queremos decir realmente cuando hablamos de vida?
- QTC-008 — Life Runs on Gradients / La vida funciona con gradientes
- QTC-007 — Deep Time / El tiempo profundo
- QTC-006 — How Far Away Is the Universe? The Cosmic Distance Ladder / ¿A qué distancia está el universo? La escalera de distancias cósmicas
- QTC-005 — How Do We Know What Stars Are Made Of? / ¿Cómo sabemos de qué están hechas las estrellas?
Juan Segurola · Multidisciplinary Publications
Additional records on Zenodo
- 3Dresyns Technical Web Publications and Engineering Documentation Corpus
- 3Dresyns Additive Manufacturing Materials Property Dataset
- From Quarks to Consciousness: Canonical Master Index / Del quark a la consciencia: índice maestro canónico
- The Universe and Its Observers: Naming & Numbering Standard / El universo y sus observadores: norma de nomenclatura y numeración
- QTC-000 - How to Read This Series / Cómo leer esta serie
- QTC-004 — Where Were the Atoms in Your Body Made? / ¿Dónde se fabricaron los átomos de tu cuerpo?
- QTC-003 — Why Are Solid Things Solid? / ¿Por qué las cosas sólidas son sólidas?
- QTC-002 — Why Is the Night Sky Dark? / ¿Por qué el cielo nocturno es oscuro?
- QTC-001 — Everything You See Is the Past / Todo lo que ves pertenece al pasado